Browse all practice questions for the ATO Corrosion Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ATO Corrosion Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Exfoliation corrosion is an advanced form of which corrosion type?
  • Avionic equipment areas may accumulate several substances contributing to corrosion. Which set of substances is accurate?
  • Volume I of the Corrosion Program provides what type of information?
  • What is the difference between repair and replacement when dealing with corrosion?
  • Which statement about sealant shelf life is true?
  • Who selects the methods to be used when dealing with corrosion?
  • Salt spray exposure influences corrosion by which mechanism?
  • When is the best time to prevent corrosion?
  • Fatigue corrosion is best described as:
  • Pitting corrosion is most commonly found on which materials?
  • Which symptom characterizes pitting corrosion?
  • Which of the following areas is the Engine Compartment among corrosion-prone areas?
  • What is passivation in stainless steel and why is it important?
  • Rubber is subject to which issue that can cause deterioration of the rubber and corrosion of nearby metal surfaces?
  • Which of the following sets of conditions must exist for corrosion to occur?
  • Why should a corrosion control plan be reviewed at major maintenance events?
  • What is pit density and how is it used in corrosion assessment?
  • Which non-destructive testing methods are used to detect corrosion?
  • Relief tubes are usually plastic and should not present a corrosion problem. Which option best states this?
  • Lubricants fill air spaces and displaced water, and provide a barrier against corrosive medium. They primarily protect against which threat?
  • The process of deterioration of a metal due to chemical reaction with its surroundings is known as:
  • Which statement best describes Type II anodizing?
  • Which corrosion form is described as occurring in the absence of water at high temperatures, such as in turbine engines or hot sections?
  • Crevice corrosion occurs when a stagnant solution pools in a crevice and the electrolyte inside the crevice has less oxygen and more metal ions than outside.
  • Which volume covers cleaning and corrosion control procedures for avionics and electronics?
  • What must you do for cold weather cleaning procedures below 40F?
  • How does magnetic particle testing work for corrosion cracks?
  • If the protective finish which covers the depleted Uranium is chipped, peeled, or otherwise removed so the dark gray or black depleted Uranium is visible, what must be done?
  • Filiform corrosion is a special form of oxygen concentration cell corrosion or crevice corrosion which occurs on metal surfaces having an organic coating system.
  • What is the key to successful preventive maintenance?
  • Which of the following is NOT a method of applying Lubricants?
  • Which volume lists consumable materials and equipment for avionics only (Air Force only)?
  • Which painting method does the Environmental Protection Agency specify for use on aircraft surfaces?
  • How often should a Navy Aircraft be cleaned when aboard a ship?
  • Which of the following is the Equipment Bay Area among corrosion-prone areas?
  • What are the preferred touch-up painting methods due to low paint waste and no solvent cleanup?
  • What is a chromate-free alternative protective coating for aluminum?
  • How should any excess lubricant be handled?
  • What is corrosion in metals?
  • Which corrosion type involves attack along grain boundaries due to sensitization?
  • What is the maximum operating temperature for the Circulating Air Drying Oven?
  • Eddy current testing is used in corrosion detection to do what?
  • What is corrosion fatigue?
  • In a protective paint system, which layer sequence correctly describes the order from substrate outward?
  • Uniform surface corrosion is described as which of the following statements?
  • What factors contribute to CUI in aircraft skin assemblies?
  • How do environmental regulations influence corrosion protection choices?
  • Water entrapment is ineffective because of what reason?
  • Moderate Corrosion is characterized by...
  • Which volume lists approved consumable materials and equipment for cleaning and corrosion control for aircraft and avionics?
  • How should lubricant be applied to minimize issues?
  • What should you not do with the portable 15 & 45 gallon Foam Generating Cleaning Unit without releasing pressure?
  • Severe Corrosion pits are deeper than...
  • Which coating layer primarily serves as the final protective and cosmetic finish in a typical system?
  • Which option is a valid touch-up painting method according to the material?
  • Pit density is most closely associated with assessing what aspect of corrosion?
  • Which material has high galvanic activity with aluminum?
  • Which component listed as part of the avionics equipment bay should be inspected for corrosion and salt spray contamination along with other equipment?
  • What is impressed current cathodic protection?
  • What is the purpose of corrosion inhibitors in primers?
  • What should you not do to depleted Uranium?
  • What is a sacrificial anode and how does it protect a structure?
  • What is a chromate conversion coating and its main hazard?
  • Which practice illustrates glare reduction through a paint finish?
  • What is a potential consequence of pitting corrosion on sheet metal?
  • Which area is a commonly affected by corrosion in aircraft equipment?
  • What method can prevent exfoliation corrosion?
  • Which combination of features is used to determine corrosion severity?
  • What actions are taken after corrosion is detected on an aircraft component?
  • When applying new sealant over an existing coating, how should the new sealant be applied?
  • Moderate Corrosion pit depths may be as deep as...
  • What is the method of fixing Severe Corrosion?
  • Fretting corrosion occurs at contact areas under load with repeated vibrations.
  • Intergranular corrosion tends to occur rapidly when which condition is present?
  • What is pit depth and how is it measured?
  • Which drying device uses circulating air and temperature to dry avionic equipment?
  • What is described as one of the most important tools for corrosion prevention and control that prevents intrusion of moisture, rain, saltwater, dust, and aircraft fluids?
  • What is a corrosion map and how is it used in maintenance planning?
  • Hot corrosion occurs in the absence of water at high temperatures, such as those found in turbine engine, compressors, and hot sections.
  • Prior to using sealant, what must be checked?
  • Which corrosion occurs at contact areas between materials under load with repeated vibrations?
  • Which of the following is NOT a common sign of corrosion in aircraft structures?
  • What is the role of primers in corrosion protection systems?
  • What must you do for hot weather cleaning procedures above 80F?
  • Which is not a degree of corrosion?
  • Which corrosion is a special form of oxygen concentration cell corrosion on metal surfaces with organic coatings and is identified by wormlike traces under the paint?
  • What is the primary objective of corrosion prevention in aviation maintenance?
  • How does the area ratio (anode to cathode) affect galvanic corrosion?
  • What is uniform corrosion?
  • What is the fundamental electrochemical process driving metal corrosion?
  • Which pairing is known for high galvanic activity with aluminum?
  • What is anodizing and what benefit does it provide to aluminum?
  • Which document contains basic corrosion prevention and maintenance information to be used at Organizational, Intermediate, and Depot levels?
  • Which is described as the most useful tool for detection of corrosion?
  • Which testing method uses a magnetic field to reveal surface and near-surface cracking by leakage fields?
  • When should a Navy Aircraft be cleaned when ashore?
  • Intergranular corrosion is defined as an attack on which part of the metal?
  • Which area is highly susceptible to corrosion and should be routinely surveyed, especially in helicopters with external ram air cooling?
  • Which of the following is a common sign of corrosion in aircraft structures?
  • Which term is produced by closed boxes?
  • What are the typical corrosion products formed on metals?
  • What is pitting corrosion and what environment promotes it?
  • What is corrosion?
  • How does insulation or foam contribute to corrosion risk in aircraft?
  • Galvanic corrosion requires which of the following elements?
  • What is stress corrosion cracking (SCC)?
  • Fatigue corrosion is cracking of metals caused by the combination of fatigue and corrosion.
  • What is the purpose of wetting aircraft exteriors with fresh water before cleaning in hot weather?
  • Which drying method is the fastest and uses a solvent ultrasonic cleaner to dry by evaporation?
  • Lubrication serves what dual purpose?
  • How does dye penetrant testing identify corrosion-related cracking?
  • Which statement about corrosion is true?
  • What is the primary objective of the Paint System?
  • Which volume covers cleaning and corrosion control procedures for aircraft?
  • Crevice corrosion occurs where a stagnant solution has pooled and the crevice electrolyte contains less oxygen and more metal ions than outside.
  • What is the method of fixing Light Corrosion?
  • What is corrosion under insulation (CUI) and why is it dangerous?
  • Which statement about humidity’s role in corrosion is most accurate?
  • What is intergranular corrosion and which material is commonly affected?
  • Which corrosion issue is associated with titanium alloys in some environments?
  • Which statement best describes the function of primer with inhibitors in a protective paint system?
  • What is mandatory when applying sealant if the previously applied sealant is damaged?
  • How does salt spray exposure influence aircraft corrosion?
  • What is the purpose of sealants in aircraft assemblies?
  • What is corrosion mapping and why is it important for maintenance?
  • Which action is prohibited when dealing with depleted Uranium?
  • Hot corrosion occurs at high temperatures in the absence of water.
  • Which of the following is NOT a function of corrosion control documentation?
  • Which statement about corrosion under insulation (CUI) is true?
  • Which of the following is very effective for detecting surface corrosion when used with knowledge of where and what to look for?
  • Fretting corrosion occurs at contact areas between materials under load subject to repeated vibrations. Aluminum, Stainless Steel, and Titanium alloys are most susceptible to this type of corrosion because the movement removes oxide coatings.
  • Where can the date of manufacture and shelf life be found on the sealant?
  • Which statement about human waste products and corrosion is true?
  • Which area is usually the last to be inspected for corrosion damage?
  • Crevice corrosion and where is it commonly seen in aircraft?
  • Which component within the avionics equipment bay should be inspected for signs of corrosion and is listed among the components to inspect?
  • Filiform corrosion is a special form of oxygen concentration cell corrosion or crevice corrosion on metal surfaces having an organic coating system.
  • Which tool is commonly used to apply sealant?
  • Why is surface preparation critical before coating?
  • What is the consequence of moisture entrapment under coatings due to poor surface preparation?
  • Filiform corrosion is recognized by wormlike traces beneath the paint film.
  • Air Drying should not be used for which type of equipment?
  • For aluminum alloys, what is a common corrosion concern?
  • Crevice corrosion typically occurs under which conditions?
  • Which components are typically found in the avionics equipment bay and should be inspected for corrosion, including hardware, electrical connectors, terminal boards, and junction boxes?
  • What is the most common type of corrosion?
  • How can improper surface preparation cause coating delamination and corrosion?
  • Which feature of the paint system helps reduce heat absorption?
  • What must be done in order to guard against the danger of static electricity during all cleaning operations?
  • How does humidity affect corrosion in aviation environments?
  • How does a Circulating Drying Oven work?
  • How does fuel contamination with water contribute to corrosion in fuel systems?
  • Which statement best describes magnesium parts requiring special attention?
  • What is the biggest contributor to corrosion in avionics?
  • Which statement best describes Detailed Inspection?
  • Magnesium parts require special attention to which aspects?
  • In electrochemical corrosion, what serves as the medium that facilitates ion movement between anodic and cathodic sites?
  • Which painting method is commonly used for touch-ups due to low waste and minimal cleanup?
  • Why is documentation important in a corrosion control program?
  • What is a protective paint system and its typical layers?
  • Light Corrosion is described as...
  • Which area should be inspected for signs of salt spray contamination and corrosion due to components like hardware and the ram air turbine?
  • Two types of batteries found on avionic equipment are
  • What is the effect of moisture entrapment due to insulation or foam on corrosion risk?
  • What is the tool used to find and evaluate the extent of corrosion damage?
  • Which area must be removed to facilitate inspection and is usually the last items to be inspected for corrosion damage?
  • Which statement correctly differentiates galvanic corrosion from crevice corrosion?
  • Which drying method is described as the most efficient for drying all types and sizes of equipment?
  • After corrosion detection, why is it important to assess structural impact before choosing repair or replacement?
  • What does ultrasonic thickness measurement assess in corrosion assessment?
  • In aircraft maintenance, cathodic protection is commonly used in which areas?
  • Which of the following factors influence galvanic corrosion rate?
  • Exfoliation corrosion is commonly found on aluminum sheets around which components?
  • In the electrochemical corrosion process, what happens at anodic sites?
  • Which step is identified as the best time to address corrosion prevention?
  • What action should be avoided with Natural and Synthetic Rubber?
  • Which statement best describes how dye penetrant testing identifies surface cracks?
  • Corrosion mapping is primarily used to do what?
  • Why are chromate conversion coatings used on aluminum?
  • Air Drying is recommended for which items?
  • Which term describes corrosion that occurs when different metals are in contact with each other in an electrolyte such as salt water?
  • Type II vs Type III anodizing?
  • What is the typical drying time for solvent vapor drying?
  • Severe Corrosion is described as...
  • For Light Corrosion, the typical pitting depth is approximately...
  • Which procedure requires reference to NAVAIR 01-1A-509-2 Chapter 2?
  • Sealant may be __ of their original shelf life after passing the required test.
  • Filiform corrosion is recognized by wormlike traces beneath the paint film.
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy